Case stories
Previous projects
Here is a small selection of previous projects
DF 1400 WRRD
DC 1040 WRD
DRUM CLEENER™ 1040 WRD
This drum washer for cleaning small parts consists of the following zones:
- Wash zone
- Rinse zone
- Drying zone
- With automatic hopper feed system at the inlet
- With automatic weighing scales and outfeed conveyor
Function
This is a 3 Stage Drum Washing machine – wash, rinse and dry. The machine is fitted with an automatic infeed system comprising a hopper and inclined conveyor. At the outfeed of the machine, parts are collected into boxes which are automatically weighed. When the box reaches the required weight, the conveyor system transports the full box out of the line and brings a new box in place to so that the process can run continuously.
This washer is delivered to the Swedish market.
DF 1400 WRRD
This tunnel washer consists of the following zones:
- 1 Wash zone
- 2 Rinsing zones
- 1 Drying zone
- Enlosed zones
- Indexing conveyor system
Function
This tunnel washer consists of 4 washing stages – washing, rinse 1, rinse 2 and drying. All zones are separated using pneumatically controlled doors. When an item is placed on the infeed table, all the doors open and the item is fed automatically into the washing zone. Once the item is in place, all the doors close and the washing process starts. When the washing process is finished, the doors open, and the item is then transported into the first rinse zone and any other items in the machine are simultaneously transported into the next washing stage.
This washer is delivered to the German market.
Compo Cleener™ 1040 WWRRDC
This tunnel washer consists of the following zones:
- 2 Wash zones
- 2 Rinsing zones
- 1 Drying zone
- 4 Cooling zones
- Blowoff zone between all the steps.
Function
This tunnel washer consists of 8 zones: 2 x wash, 2 x rinse and 1 x drying and 4 x cooling – and is used for washing newly worked items in the pump and motor industry.
This washer is delivered to the German market.
Twin Cleener™ 130 WRD
This frontloader consists of the following steps:
- Wash
- Rinse
- Drying
- Rotating basket, to be able to load and unload the items from the same side.
- Siemens PLC and touch screen.
Function
This frontloader consists of 3 steps: washing, rinsing and drying – and is used for washing gears. In front of the door, a loading ramp is mounted to be able to pull the grate all the way out, in order to better place the parts on the grate. On this model, the customer have chosen to get a rotating basket on the grate, so you can load and unload the items from the same side of the loading ramp.
This washer is delivered to the Danish market.
Twin Cleener™ 130 WRD (Double)
This frontloader consists of the following steps:
- Wash
- Rinse
- Drying
- Siemens PLC, incl. Touch screen.
- Cleaning area: 1300 x 2300 mm.
- Square washing system + rotating spray bar from top and bottom.
Function
This frontloader consists of 3 steps: washing, rinsing and drying – and is used for washing hospital beds and various auxiliary equipment. In this connection, the system has been lowered into the grave, so that the grate comes down to floor level.
This washer is delivered to the Norwegian market.